熱變形維卡溫度測試儀簡單介紹
點擊次數：3806 更新時間：2013-05-15
熱變形維卡軟化點測定儀 產品描述：
The thermal deformation vicat softening point tester product description:
一、 產品名稱：熱變形維卡軟化點溫度測定儀
A, product name: hot deformation vicat softening point temperature tester
二、 產品型號：BWR-A
Second, the product model: BWR - A
三、熱變形維卡軟化點溫度測定儀用途:
Three, thermal deformation vicat softening point temperature tester USES:
本儀器是適用于化工企業、 科研院所、大專院校等廣泛用于熱塑性塑料、硬橡膠和長纖維增強復合材料等熱變形溫度（HDT）和維卡溫度（VST）的測定。
The instrument is suitable for chemical industry enterprises, research institutes, colleges and universities, etc. Widely used for thermoplastic plastic,
hard rubber and long fiber reinforced composite materials such as thermal deformation temperature （HDT） and vicat temperature （VST） measurement.
維卡軟化點測定儀
Vicat softening point tester
四、符合標準：
Four, conform to the standard:
GB/T1633-2000《熱塑性塑料軟化溫度（VST）的測定》
GB/T1633-2000 "thermoplastic plastic softening temperature （VST） determination of the
ISO 306_2004（E）塑料 熱塑性塑料 維卡軟化溫度的測定（VST） 譯文
ISO 306 _2004 （E） thermoplastic plastic vicat softening temperature （VST） for determination of the translation
GB/T1634-2004《塑料彎曲負載熱變形溫度試驗方法》
GB/T1634-2004 "plastic bending load thermal deformation temperature testing method"
ISO 75 _2004（E）塑料 負荷變形溫度的測定 譯文
ISO 75 _2004 （E） plastic load deformation temperature measurement of the translation
GB8802《硬聚氯乙烯（PVC-U） 管材及管件維卡軟化溫度測定方法》
-u GB8802 the rigid polyvinyl chloride （PVC） pipes and fittings vicat softening temperature measurement method,
ASTM D 1525-1991 塑料的維卡軟化溫度的試驗方法 譯文
ASTM D 1525-1991 plastic the vicat softening temperature of the test method of translation
ASTM D648-06 在撓曲負荷下塑料的撓曲溫度的試驗方法 譯
ASTM D648-06 plastic deflection temperature under flexural load test method
維卡軟化點溫度測定儀*符合ISO75（E）、ISO306（E）、GB/T8802、GB/T1633、GB/T1634標準的規定，
Vicat softening point temperature tester fully meet ISO75, ISO306 （E） （E）, GB/T8802, GB/T1633, GB/T1634 the provisions of the standard
該機采用微處理器和PC機分布控制系統，具有Windowsxp 中文操作界面，在試驗過程中，
This machine is controlled by microprocessor and PC distribution system, with the Windows xp operation interface in Chinese, in the process of test,
實時監控試驗溫度、試驗變形量的曲線走向，并動態地時實繪制溫度、變形量的曲線，實現歷史存盤，
Real-time monitoring experiment temperature, the deformation curve, and dynamically when drawing the curve of the temperature,
deformation, realize the historical inventory,
打印試驗報告，以便今后隨時查詢以前的試驗數據，進行各種實驗數據的對比研究，是一種智能化*的測試儀器，
Print the test report for future query at any time before the test data, for a variety of experimental data contrast research,
is a kind of high inligent test instrument,
當用鼠標點擊形變——溫度曲線的任何一處時，界面會自動顯示該處的變形量及溫度值。該儀器為立式柜機結構，
When using the mouse to click anywhere in the deformation, temperature curve,
the interface of the deformation and the temperature will automatically display here. The instrument for the vertical structure of ark,
恒溫介質箱內采用45°雙螺旋攪拌，并采用先進的溫度傳感器控制溫度，故此，介質的溫度梯度小，熱損失小，恒溫均勻，
Constant temperature medium box USES 45 ° double-helix mixing, and adopts advanced temperature sensor control temperature, therefore,
medium temperature gradient is small, heat loss is small, uniform temperature,
當試驗溫度達到上限設定溫度時自動停止加熱，試驗架具有自動升降功能，操作簡單，在同類機型中具有優良的性能價格比。
When the temperature of the test is to limit temperature automatically stop heating, the test machine with automatic lifting function,
simple operation, excellent price performance ratio in the similar type.
五、熱變形維卡軟化點溫度測定儀 技術參數：
Five, the thermal deformation vicat softening point temperature tester technical parameters:
1、溫度控制范圍：環境溫度——300℃
1, the range of temperature control: the environment temperature, 300 ℃
2、升溫速率：120±5℃/h（12±1℃/6min）或50±3℃/h（5±0.5℃/6min）
2, the heating rate: 120 + 5 ℃ / h （12 + / - 1 ℃ / min） or 50 + 3 ℃ / h （5 + / - 0.5 ℃ / 6 min）
3、溫度分辨率：0.01℃
3, temperature resolution: 0.01 ℃
3、zui大溫度誤差：±0.5℃
3, the maximum error of the temperature: plus or minus 0.5 ℃
4、形變測量方法：千分表
4, deformation measurement method: dial gauge
5、變形測量范圍：-0.1mm——5.0mm
5, deformation measurement range: 0.1 mm - 5.0 mm
6、zui大變形誤差：±0.01毫米
6, the maximum deformation error: + / - 0.01 mm
7、試 樣 架 數：三架一溫
7, try sample number: three temperature
8、加 熱 介 質：甲基硅油（需方自備）
8, add heat medium quality: methyl silicone oil （the buyer should bring along their own）
9、加 熱 功 率：2.5KW
9, add thermal power: 2.5 KW
10、冷 卻 方 法：150℃以上自然冷卻，150℃以下自然冷卻或水冷
10, but cold side method: natural cooling above 150 ℃, 150 ℃ under natural cooling or water cooling
11、具有上限溫度任意設定（環境溫度——300℃）的保護功能或zui高上限300℃的保護
11, has the limit temperature set arbitrary （ambient temperature, 300 ℃）, the protection of the function or the maximum protection of 300 ℃
12、負載桿和壓頭總質量：88g
12, rod load and pressure head total quality: 88 g
13、試驗zui大負荷：
13, the maximum load test:
A：維卡試驗負荷：GA=10N±0.2N（即1000g）、 GB=50N±1N（即5000g）
A: d card test load: GA = 10 N + / - 0.2 N （1000 g）, 50 GB = N + 1 N （5000 g）
B：熱變形試驗負荷：F=2×δ×b×h×h/（3×L）
B: hot deformation test load: F = 2 x delta x B * h/h （3 x L）
式中：F——試樣所需加的載荷，單位N
Type: F - sample needed to add load, unit N
δ——熱變形標準彎曲正應力：
The delta - hot bending normal stress deformation standards:
方法A：使用纖維應力1.80MPa
Method A: use the fiber stress 1.80 MPa
方法B：使用纖維應力0.45MPa
Method B: use the fiber stress 0.45 MPa
方法C：使用纖維應力8.00MPa
C: the use of fiber stress 8.00 MPa
b——試樣的寬度，單位m
B - the width of the sample, the unit m
h——試樣的高度，單位m
H - the height of the sample, the unit m
L——兩支點間的距離，0.100m
L - the distance between the two fulcrum, 0.100 m
14、電 源：AC220V±10%、50Hz、30A
14, the electric source: AC220V plus or minus 10%, 50 hz, 30 a
15、需方自備甲基硅油：閃點300度、粘度200厘斯，20升。
15, the buyer should bring along their own methyl silicone oil: flash point 300 degrees, the viscosity of 200 CST, 20 liters.
六、熱變形維卡軟化點溫度測定儀特點：主要特點：
Six, the thermal deformation vicat softening point temperature tester features: main features:
1：采用瑞士進口高精度數顯千分表作為試樣變形測量元件，同時配備的數據傳輸線與微機相連，可以實時的將測得的位移值上傳到微機上。
1: the Swiss imports of high-precision digital display micrometer as specimen deformation measuring element,
at the same time equipped with a dedicated data line connected to the computer, can real-time upload measured displacement value to the microcomputer.
這種數顯千分表具有高精度、高穩定性等特點，充分保證試驗數據準確性。
The digital display micrometer possesses the characteristics of high precision, high stability, and fully guarantee the test data accuracy.
2：試樣架的連接桿與負載桿采用相同直徑、相同材料的低膨脹合金制成，可以將試樣架的變形減小到zui小，提高試驗結果的準確性。
2: the sample frame of connecting rod and rod load with same diameter and materials made of low expansion alloy,
deformation of the specimen holder can be reduced to a minimum, to improve the accuracy of the test results.
3：具有試樣架自動升降功能，采用直線電機驅動具有承載能力強、運行平穩等特點。
3: have a specimen holder automatic lifting function, driven by linear motor has the characteristics of bearing capacity of strong, smooth operation.
4：可同時實現熱變形和維卡軟化點溫度兩種試驗。
4: can achieve at the same time two kinds of thermal deformation and vicat softening point temperature test.
5：有水冷卻、自然冷卻等方式，根據用戶需要進行選擇。
5: is there a water cooling, natural cooling, etc., according to user's needs and tastes.
6：配備PoweTest軟件，功能強大，界面友好，操作簡便。
6: PoweTest with special software, powerful function, friendly interface, easy operation.
7：具有多重安全保護裝置，保證試驗設備及操作人員的安全性。
7: with multiple safety protection devices to ensure that the test equipment and the safety of operating personnel.
七、熱變形維卡軟化點溫度測定儀主要配置：
Seven, the thermal deformation vicat softening point temperature tester main configuration:
試驗主機一臺
A test hosts
溫度傳感器一只
A temperature sensor
光柵千分表三塊
Three piece of grating dial gauge
熱變形及維卡測頭各三套
Thermal deformation and vicat three copies each of the measuring head
打印機一臺
A printer
工具一套
A set of special tools
標簽 電壓擊穿試驗儀，介電擊穿強度試驗儀，海綿泡沫落球回彈試驗儀，海綿泡沫壓陷硬度試驗儀，耐漏電起痕試驗儀，水平垂直燃燒試驗儀
上一篇：水平垂直燃燒試驗儀 交流 下一篇：耐電壓測試儀分析
